ZHU-105 glue stiring machine-Glue stiring machine-Shenzhen Zhonghu Automation Equipment Co., Ltd.

Contact us

Consulting Hotline：0755-2728-6106

Company name: Shenzhen Lake automation equipment Co., Ltd.
Telephone: 0755-2728-6106
Fax: 0755-27427175
Mobile phone: 136-3286-0790
Mailbox: Address: Building 3, building D, No. 12, Xinqiao industrial district, Xinqiao street, Baoan District, Shenzhen

ZHU-105 glue stiring machine

Category：Glue stiring machine

Description：

Hotline:0755-2728-6106

Purchasing Consultation

Introduction
Parameter

| Application: Glue ratio with packing

| Principle of operation：

1, glue quantity is set to digital input
2, now with the current use, on-demand amount
3, glue set, the density of different glue can be set by the coefficient.

| Parameters:

1	Proportion with glue	Fixed proportion between 2:1~1:1 is allowed
2	Mixing method	Dynamic mixing
3	Counter tops	DIY
4	Programming mode	Digital programming
5	Dimensions	8507001400MM
6	The main pump (A pump)	Screw pump: wear-resistant, suitable for additives glue (China-German joint venture)
7	Attached pump (B pump)	Screw pump: wear-resistant, suitable for additives glue (China-German joint venture)
8	Tank Capacity	AB Cylinder 40L with stirring
9	A plastic flow	2-15g/s
10	A plastic head	Single
11	Input pressure	0.5-0.7Mpa
12	Machine power	1000W
13	Supply voltage	AC220V±10%,50-60HZ

| Device Configuration:

1	Control System	Xinjie PLC + 7.2 inch Kunlun on-state touch screen
2	Software system	耀彩网 Zhonghu R&D independently，a domestic counterparts developed a software anti-misuse function, anti-fade automatic shutdown function
3	Operate motor	YAKO Original motor
4	Metering pump body	耀彩网 China - German joint venture
5	Cutting system	Zhonghu R&D independently
6	Mixing device	Zhonghu R&D independently
7	Adding automatic	Vacuum pump negative pressure feeding
8	Negative pressure to bubble	Vacuum pump negative pressure in addition to bubbles
9	耀彩网 Barrel stiring	Taiwan OUTAI geared motor
10	Mixing tube cleaning	Gas and liquid cleaning
11	Level sensing	Electronic liquid sensor switch
12	Frame material	A3*3mm manufacture

| Features:

1	Friendly and concise interface	Foolproof operation program design, simple operation, practical, ordinary workers can learn all operating methods in 5 minutes
2	High-end imported electronic control system	The main electrical part of the wiring, dust, anti-static, have reached foreign standards Relay Omron. Using the letter Jie PLC All motors are overload protected.
3	Glue detEction feedback function	The drum part is equipped with low level alarm function, timely remind the glue to add
4	Glue filter four protection	Filter protection measures to reduce the mechanical pump body failure probability, to prevent impurities in the glue into the glue pipeline
5	High precision mechanical pump body	Precision adjustment wear type
6	Automatic mechanical agitation	The use of imported high-quality safety factor reliable silicone film fever, super protection; Rubber bucket heating effectively solve the glue in the low temperature flow is not good
7	Glue bucket heating	耀彩网 The use of imported high-quality safety factor reliable silicone film fever, super protection

| Characteristics of gluing part:
A. Adjust the ratio of adjustment, plastic volume adjustable. Ready to use at any time, on-demand ratio, save glue.
B. Simple and convenient operation, simple editing procedures, no cleaning, easy disassembly, A B directly into the two glue into the two corresponding barrels, when filling with plastic, the workers only need to press the start switch can be.
C. According to the performance of the glue, A rubber bucket with a thermostat device. B rubber bucket sealed to prevent volatile, liquid level sensor device, when the glue below this level automatically alarm, add the corresponding glue
D. Just clean the mixing tube.